January JEDEC. STANDARD. DDR2 SDRAM SPECIFICATION be addressed to JEDEC Solid State Technology Association, Wilson Boulevard. DDR2 SDRAM is a double data rate synchronous dynamic random-access memory interface. It superseded the original DDR SDRAM specification, and is superseded by .. JEDEC standard: DDR2 SDRAM Specification: JESDF, November ** · JEDEC. The JEDEC memory standards are the specifications for semiconductor memory circuits and Memory modules of the DDR2-SDRAM type are available for laptop, desktop, and server computers in a wide selection of capacities and access.
|Published (Last):||7 December 2010|
|PDF File Size:||8.13 Mb|
|ePub File Size:||3.89 Mb|
|Price:||Free* [*Free Regsitration Required]|
In addition to double pumping the data bus as in DDR SDRAM transferring data on the rising and falling edges of the bus clock signalDDR2 allows higher bus speed and requires lower power by running the internal clock at half the speed of the data bus. The two factors combine to produce a total of four data transfers per internal clock cycle. Alternatively, DDR2 memory operating at twice the external data bus clock rate as DDR may provide twice the bandwidth with the same latency.
During an access, four bits were read or written to or from a four-bit-deep prefetch queue. This queue received or transmitted its data over the data bus in two data bus clock cycles each clock cycle transferred two bits of data. DDR2’s bus frequency is boosted by electrical interface improvements, on-die terminationprefetch buffers and off-chip drivers. However, latency is greatly increased as a trade-off.
DDR2 SDRAM STANDARD | JEDEC
Thus, DDR2 memory must be operated at twice the data rate to achieve the same latency. This packaging change was necessary to maintain signal integrity at higher bus speeds.
Power savings are achieved primarily due to an improved manufacturing process through die shrinkage, resulting in a drop in operating voltage 1. The lower memory clock frequency may also jrdec power reductions in applications that do not require the highest available data rates. DIMMs are identified by their peak transfer capacity often called bandwidth.
At least one manufacturer has reported this reflects successful testing at a higher-than-standard data rate  whilst others simply round up for the name. Bandwidth is calculated by taking transfers per second and multiplying by eight. This is because DDR2 memory modules transfer data on a bus that is 64 data bits wide, and since a byte comprises 8 bits, this equates to 8 bytes of data per transfer.
DDR2 was introduced in the second quarter of at two initial clock rates: Both performed worse than the original DDR specification due to higher latency, which made total access times longer. These chips are mostly standard DDR chips that have been tested and rated to be capable of operation at higher clock rates by the manufacturer.
Such chips draw significantly more power than slower-clocked chips, but usually iedec little or no improvement in real-world performance. DDR2 started to become competitive against the older DDR standard by the end ofas modules with lower latencies became available.
It had severe overheating issues due to the nominal DDR voltages. However, further confusion has been added to the mix with the appearance of budget and mid-range graphics cards which claim to use “GDDR2”.
JEDEC JESD79 | DDR SDRAM Specification | Electronics Notes
These cards actually use standard DDR2 chips designed for use as main system memory although operating with higher latencies to achieve higher clockrates. These chips cannot achieve the clock rates of GDDR3 but are inexpensive and fast enough to be used as memory on mid-range cards.
From Wikipedia, the free encyclopedia. Archived from the original on Dynamic random-access memory DRAM.
JEDEC memory standards
Retrieved from ” https: Views Read Edit View history. In other projects Wikimedia Commons.